Warm-season grass
Centipede Grass Lawn Care Schedule
Centipede is a slow-growing, low-maintenance warm-season grass suited to the sandy, acidic soils of the Southeast. It needs little fertilizer and little mowing, but it is sensitive: too much nitrogen or too high a soil pH causes the dieback known as "centipede decline."
- Type
- Warm-season
- Mowing height
- 1–2″
- Nitrogen budget
- 1–2 lbs N / 1,000 sq ft / yr
- Growth habit
- Spreading (self-repairs)
- Shade tolerance
- Moderate
- Drought tolerance
- Moderate
- Traffic tolerance
- Low
- USDA zones
- 7–9
Get region-specific timing
Pick your USDA hardiness zone for a Centipede schedule with timing shifted to your local season:
Key care windows
Timing windows are flexible (early / mid / late) and tuned to a typical transition-zone season — soil temperature and your local weather should always have the final say.
Spring pre-emergent (crabgrass)
Apply a pre-emergent herbicide as soil temperatures approach 55°F to stop crabgrass and other summer weeds before they germinate. A second application 6–8 weeks later extends control through the season.
Don't apply a pre-emergent if you plan to seed — it blocks grass seed too. Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.
Spring green-up & first mow
As soil temperatures reach about 55°F the lawn breaks dormancy and greens up. Once it's about half green, mow low to clear dormant material and let sunlight reach the crowns. Don't fertilize until it's at least 80% green.
First feeding
Make the first fertilizer application 2–4 weeks after full green-up, once the lawn is actively growing. Less is more with centipede: only about 1–2 lbs of nitrogen per 1,000 sq ft per year. Use iron rather than extra nitrogen to green it up. A soil test matters here because centipede prefers a slightly acidic pH (5.0–6.0).
Over-fertilizing is the most common way to kill centipede. Stay within the low 1–2 lb annual nitrogen budget and never exceed ~1 lb per 1,000 sq ft in one feeding; reach for iron, not nitrogen, for color. Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.
Aeration & dethatching
Core-aerate (and dethatch if the thatch layer is over about ½") during the peak growing season, when warm-season turf recovers fastest. Avoid aerating dormant or drought-stressed turf.
Summer feeding program
Summer is the warm-season growth peak. Less is more with centipede: only about 1–2 lbs of nitrogen per 1,000 sq ft per year. Use iron rather than extra nitrogen to green it up. A soil test matters here because centipede prefers a slightly acidic pH (5.0–6.0). Spread the annual budget across the season rather than applying it all at once.
Never exceed ~1 lb of nitrogen per 1,000 sq ft in a single feeding. Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.
Summer weed & pest watch
Spot-treat broadleaf weeds during active growth, never on drought-stressed turf. Watch for insect and disease pressure in hot, humid weather and treat problem areas rather than the whole lawn.
Final feeding & soil test
Give a final feeding in early fall, then stop nitrogen — late-season nitrogen pushes tender growth into frost. Fall is also the best time to take a soil test so amendments are ready before spring.
Stop nitrogen about 6 weeks before your first expected frost. Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.
Fall pre-emergent (winter weeds)
A fall pre-emergent applied before soil cools below about 70°F controls winter annual weeds like Poa annua and henbit.
Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.
Winter dormancy
Expect a brown, dormant lawn from first frost until spring green-up. Hold off on fertilizer and pre-emergent. A light watering during extended winter drought helps prevent desiccation.
Month-by-month schedule
A quick at-a-glance plan for Centipede grass, month by month.
| Month | Season | What to do |
|---|---|---|
| January | Winter· dormant |
|
| February | Winter |
|
| March | Spring |
|
| April | Spring |
|
| May | Spring |
|
| June | Summer |
|
| July | Summer |
|
| August | Summer |
|
| September | Fall |
|
| October | Fall |
|
| November | Fall· dormant |
|
| December | Winter· dormant |
|
Centipede care guide
Mowing
Mow centipede at 1–2". It grows slowly, so you'll mow infrequently. Avoid scalping — its shallow roots recover slowly from stress.
Watering
Centipede has shallow roots and shows drought stress sooner than other warm-season grasses, but it dislikes constant moisture. Aim for about 1" per week and let the surface dry between waterings.
Fertilizing
Less is more with centipede: only about 1–2 lbs of nitrogen per 1,000 sq ft per year. Use iron rather than extra nitrogen to green it up. A soil test matters here because centipede prefers a slightly acidic pH (5.0–6.0).
Weed control
Time a spring pre-emergent for crabgrass and a fall pre-emergent for winter weeds. Use only herbicides labeled for centipede and at the centipede rate — it is more sensitive than other lawns.
Strengths
- Very low fertilizer and mowing needs
- Thrives in acidic, sandy, low-fertility soils
- Tolerates light shade
Watch out for
- Easily damaged by over-fertilizing (centipede decline)
- Slow to recover from wear or scalping
- Shallow roots reduce drought and cold tolerance
Safety first
Over-fertilizing is the most common way to kill centipede. Stay within the low 1–2 lb annual nitrogen budget and never exceed ~1 lb per 1,000 sq ft in one feeding; reach for iron, not nitrogen, for color.
Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.