YardLedger

Warm-season grass

Carpetgrass Lawn Care Schedule

Carpetgrass is a warm-season grass suited to the wet, acidic, sandy soils of the Deep South and Gulf Coast, where its tolerance of poor drainage sets it apart from other lawns. It forms a dense, low, light-green turf with very low fertility needs — but it is coarse, sends up seedheads constantly in summer, and has poor drought and cold tolerance, so it is a practical ground cover for damp problem areas more than a showcase lawn.

Type
Warm-season
Mowing height
1–2″
Nitrogen budget
1–2 lbs N / 1,000 sq ft / yr
Growth habit
Spreading (self-repairs)
Shade tolerance
Moderate
Drought tolerance
Low
Traffic tolerance
Low
USDA zones
8–10

Get region-specific timing

Pick your USDA hardiness zone for a Carpetgrass schedule with timing shifted to your local season:

Key care windows

Timing windows are flexible (early / mid / late) and tuned to a typical transition-zone season — soil temperature and your local weather should always have the final say.

mid-February to mid-March

Spring pre-emergent (crabgrass)

Apply a pre-emergent herbicide as soil temperatures climb through the low 50s°F — before they reach the ~55°F at which crabgrass germinates — to stop summer weeds before they start. A second application 6–8 weeks later extends control through the season.

Don't apply a pre-emergent if you plan to seed — it blocks grass seed too. Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.

mid-February to late March

Spring green-up & first mow

Warm-season turf begins breaking dormancy as soil temperatures reach about 55°F, but it isn't actively growing until the soil warms to roughly 65°F. Once it's about half green, mow low to clear dormant material and let sunlight reach the crowns. Don't fertilize until it's at least 80% green and growing.

late April to mid-May

First feeding

Make the first fertilizer application 2–4 weeks after full green-up, once the lawn is actively growing. Very little nitrogen is needed — about 1–2 lbs per 1,000 sq ft per year. Carpetgrass grows on low-fertility soils by nature, and excess nitrogen mostly means more mowing without a better lawn. Use iron rather than extra nitrogen if you want deeper color.

Carpetgrass wants the acidic, low-fertility soil most lawns do not — do not over-lime or over-feed it. Keep nitrogen at or below ~1 lb per 1,000 sq ft per feeding, and reach for iron, not more nitrogen, for color. Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.

early May to late June

Aeration & dethatching

Core-aerate (and dethatch if the thatch layer is over about ½") during the peak growing season, when warm-season turf recovers fastest. Avoid aerating dormant or drought-stressed turf.

early June to late August

Summer feeding program

Summer is the warm-season growth peak. Very little nitrogen is needed — about 1–2 lbs per 1,000 sq ft per year. Carpetgrass grows on low-fertility soils by nature, and excess nitrogen mostly means more mowing without a better lawn. Use iron rather than extra nitrogen if you want deeper color. Spread the annual budget across the season rather than applying it all at once.

Never exceed ~1 lb of nitrogen per 1,000 sq ft in a single feeding. Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.

early June to late August

Summer weed & pest watch

Spot-treat broadleaf weeds during active growth, never on drought-stressed turf. Watch for insect and disease pressure in hot, humid weather and treat problem areas rather than the whole lawn.

early September to late September

Final feeding & soil test

Give a final feeding in early fall, then stop nitrogen — late-season nitrogen pushes tender growth into frost. Fall is also the best time to take a soil test so amendments are ready before spring.

Stop nitrogen about 6 weeks before your first expected frost. Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.

late September to mid-October

Fall pre-emergent (winter weeds)

A fall pre-emergent applied before soil cools below about 70°F controls winter annual weeds like Poa annua and henbit.

Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.

early November to late December

Winter dormancy

Expect a brown, dormant lawn from first frost until spring green-up. Hold off on fertilizer and pre-emergent. A light watering during extended winter drought helps prevent desiccation.

Month-by-month schedule

A quick at-a-glance plan for Carpetgrass, month by month.

MonthSeasonWhat to do
JanuaryWinter· dormant
  • Dormant season — no feeding; water lightly only during extended drought.
FebruaryWinter
  • Watch for green-up; do the first low mow to clear winter material.
  • Apply crabgrass pre-emergent before soil reaches ~55°F.
MarchSpring
  • Watch for green-up; do the first low mow to clear winter material.
  • Apply crabgrass pre-emergent before soil reaches ~55°F.
AprilSpring
  • Make the first feeding once the lawn is fully green and growing.
  • Mow at 1–2" and water deeply as needed.
MaySpring
  • Make the first feeding once the lawn is fully green and growing.
  • Core-aerate during peak growth; dethatch if thatch is heavy.
  • Mow at 1–2" and water deeply as needed.
JuneSummer
  • Core-aerate during peak growth; dethatch if thatch is heavy.
  • Continue the summer feeding program on schedule.
  • Spot-treat weeds and scout for pests; water deeply in heat.
  • Mow at 1–2" and water deeply as needed.
JulySummer
  • Continue the summer feeding program on schedule.
  • Spot-treat weeds and scout for pests; water deeply in heat.
  • Mow at 1–2" and water deeply as needed.
AugustSummer
  • Continue the summer feeding program on schedule.
  • Spot-treat weeds and scout for pests; water deeply in heat.
  • Mow at 1–2" and water deeply as needed.
SeptemberFall
  • Apply a fall pre-emergent for winter weeds before soil cools.
  • Make the final feeding of the year; take a soil test.
  • Mow at 1–2" and water deeply as needed.
OctoberFall
  • Apply a fall pre-emergent for winter weeds before soil cools.
  • Mow at 1–2" and water deeply as needed.
NovemberFall· dormant
  • Lawn is dormant — no feeding; water lightly only in extended drought.
DecemberWinter· dormant
  • Lawn is dormant — no feeding; water lightly only in extended drought.

Carpetgrass care guide

Mowing

Mow carpetgrass at 1–2", and expect to mow often in summer just to keep its fast, tall seedheads down — those seedstalks are its most-complained-about trait. A sharp blade keeps the coarse leaves from shredding.

Watering

Carpetgrass likes moisture and has poor drought tolerance — it is chosen for wet spots for a reason and browns quickly where it dries out. Give it about 1" of water per week in dry weather; it will not thrive on the low irrigation a grass like bahiagrass shrugs off.

Fertilizing

Very little nitrogen is needed — about 1–2 lbs per 1,000 sq ft per year. Carpetgrass grows on low-fertility soils by nature, and excess nitrogen mostly means more mowing without a better lawn. Use iron rather than extra nitrogen if you want deeper color.

Weed control

A dense carpetgrass stand shades out many weeds on its own. Time a spring pre-emergent for crabgrass and use only products labeled for carpetgrass; on the acidic soils it prefers, do not lime to 'fix' it — carpetgrass actually likes the low pH.

Strengths

  • Tolerates wet, poorly drained, acidic soils that drown other grasses
  • Very low fertilizer needs
  • Dense, low growth that crowds out many weeds

Watch out for

  • Coarse texture and constant summer seedheads mean frequent mowing
  • Poor drought tolerance — browns quickly in dry spells
  • Not cold-hardy and slow to green up in spring

Common Carpetgrass lawn problems

Browning, patches, or pests on a carpetgrass lawn? These guides help you diagnose what's actually wrong and what to do about it — safely, before you treat.

A starting point — your plan adjusts to your yard

This Carpetgrass schedule is a research-based template for your grass type. Your lawn is one of a kind, though: the right timing and amounts also depend on your soil test, sun and shade, irrigation, lawn size, and the goals you set — a low-input yard, the deepest possible color, or just crowding out weeds. YardLedger takes this template and adjusts it to your yard's specific needs, then keeps refining it from the history of what you've actually done and how the lawn responded — so every recommendation gets more personal over time.

Safety first

Carpetgrass wants the acidic, low-fertility soil most lawns do not — do not over-lime or over-feed it. Keep nitrogen at or below ~1 lb per 1,000 sq ft per feeding, and reach for iron, not more nitrogen, for color.

Always read and follow the product label — it is the legal authority on rates, timing, and safety. These windows are regional estimates, not a prescription; defer to the label and your local extension office.

Build my Carpetgrass schedule

These windows are a research-backed starting point. YardLedger tailors them to your exact yard — your grass, soil, sun, lawn size, and the goals you set — then keeps adjusting the plan from the history of everything you log and reminds you what's next.

Build my Carpetgrass schedule

Free to start • No credit card required.